How to Order
Please follow carefully to ensure that your order is processed quicklyGeneral Info
Purchase orders can be sent via email to salesrf@mrcy.com or call us at 209-825-3977
Option Selection
The optional features available for each module is listed on the datasheet and included in the quote. Please list the optional features needed on the PO by name or number code, which can be referenced (see option table below)
Options not specified in the Purchase Order will not be present on the units delivered.
Tuning & Testing
If required, specify the frequency band the amplifier will be used in, especially if different from the default bandwidth listed in the unit's specification sheet. If the forward and/or reverse power detection options are selected, please specify what levels to set the detectors to (e.g. 2.5V @ 40dBm), if different from the default values listed at the bottom of the unit's specification sheet.
Ultra Linear (L) models can be optimized for use with various complex RF signals. Please contact Mercury Systems if specific performance specs are required.
OPTIONS FOR AMPLIFIERS
As an example: SM2325-47L (core product catalog number)
To add options SM2325-47L-06-05-13 (three options have been added -06 is heat sink, -15 is a fan and -13 is the on/off function.
Option # | Option Name | Option Description |
01F | FWD Detection | Analog DC voltage that increases as the Forward RF Output power increases. |
01R | REV Detection | Analog DC voltage that increase as the Reflected RF Output increases. |
02 | RF Sampling (Sample Port) | Sample port provided with SMA connector (-30 dBr typical). |
05 | Fan | Available on lab units and 19" rack mount configurations. |
06 | Heat sink | Integral heat sink is supplied for thermal management. |
07 | N Connectors | Available on certain models. |
08 | Right Angle SMA Connectors | Available on certain models. |
10 | Hi Temperature Turn Off | Raises thermal shut off temperature from default +75 degC to +85 - +90 degC |
13 | On/Off | TTL Control: Logic High (+2.5 - +5V) turns amplifier on. Logic Low (+0V - +1.2V) turns amplifier off. |
13R | Reversed On/Off | TTL Control: Logic Low (+0V - +1.2V) turns amplifier on. Logic High (+2.5 - +5V) turns amplifier off. |
16 | No On/Off | TTL On/Off option disabled. PA powers up when main DC power connected. |
19 | +10 VDC | Many amplifiers that operate on +12 VDC can be modified to operate on +10 VDC. |
22 | Level Control | A voltage variable attenuator used to vary the gain. +0V = minimum attenuation, +5V = maximum attenuation (available on certain models). |
23 | Control Switch | High speed (on/off) switching of the amplifier. (1 us Rise / Fall time). |
24 | Thru-Holes | Holes that go completely through the amplifier housing so that the unit can be mounted to an external heatsink. Default option when heatsink not equipped. |
26 | Thermal Detector | Analog voltage that increases as the case temperature rises. |
-
Technical Briefs
Typical Applications
Contacts
Domestic Contacts